Skip to content

Water Filter vs Water Softener: Which Do You Need (or Both)?

A filter removes contaminants like chlorine and lead. A softener removes the minerals that cause scale. How to tell which problem you have, and what each costs.

By Pete · Updated November 12, 2026

Some links on this page go to retailers, and some may be affiliate links: if you buy through them we may earn a commission at no extra cost to you. It never decides our rankings. How we choose.

The two get mixed up all the time, partly because companies sell them side by side and partly because both “treat” water. They solve different problems, though, and buying the wrong one is an expensive way to find that out.

The short answer: a water filter removes contaminants: things like chlorine, sediment, lead or PFAS that affect taste, smell or health. A water softener removes hardness minerals (calcium and magnesium) that leave scale on taps, kettles and shower glass and make soap hard to rinse off. A filter won’t soften your water, and a softener won’t remove most contaminants. Plenty of homes need one; some need both.

Side by side

Water filter Water softener
What it removes Contaminants: chlorine, chloramine, sediment, and, depending on type, lead, PFAS, pesticides, bad tastes and odors Hardness minerals: calcium and magnesium (plus small amounts of iron)
How it works Physical filtering and adsorption (carbon, sediment media, reverse osmosis membranes) Ion exchange: resin beads swap calcium and magnesium for sodium or potassium
Fixes Chlorine taste and smell, cloudy or gritty water, specific health contaminants Scale on fixtures and appliances, spotty dishes, soap scum, stiff laundry, dry-feeling skin from soap residue
Doesn’t fix Hard water. Filters, including shower filters, don’t remove hardness minerals Chlorine, lead, PFAS and most other contaminants
Sizes Shower, pitcher, faucet, under-sink, whole-house Usually whole-house, installed where water enters the home
Upkeep Replace cartridges (every 2 months to a year, depending on type) Top up salt; resin lasts many years
Typical installed cost From under $50 (shower or pitcher) to several thousand (whole-house systems) Most homeowners pay about $1,500 to $3,000 installed; the full range is about $500 to $6,000

Softener costs: Fixr reports a national average of about $2,500; HomeAdvisor and Angi put the average near $1,500, with a range of $500 to $6,000. Single-tank units run about $500 to $1,700 installed and twin-tank systems about $1,000 to $5,000.

How to tell which one you need

Start with your water, not with the products.

Step 1: find out what’s in your water

On city water, your utility has to publish an annual water quality report (sometimes called a Consumer Confidence Report). Search “[your city] water quality report.” It shows which disinfectant your utility uses (chlorine or chloramine) and any contaminants detected. Many reports also list hardness; if yours doesn’t, call the utility or test it yourself.

On a private well, nobody tests your water but you. Get a lab test, because well problems (iron, sulfur, bacteria, nitrates, hardness) vary hugely from one well to the next.

For hardness alone, cheap test strips work well and take seconds.

Step 2: check your hardness

Hardness is measured in grains per gallon (gpg) or milligrams per liter (mg/L). One grain per gallon is about 17.1 mg/L.

Hardness Grains per gallon mg/L
Soft under 1 under 17
Slightly hard 1 to 3.5 17 to 60
Moderately hard 3.5 to 7 60 to 120
Hard 7 to 10.5 120 to 180
Very hard over 10.5 over 180

Below about 7 gpg, most households don’t need a softener. Above 10.5 gpg, most notice scale and soap problems quickly, and that’s where a softener earns its keep in less cleaning and longer-lasting appliances.

Step 3: match the problem to the fix

What you’re noticing Likely cause What helps
White crust on taps and showerheads, spots on glass and dishes Hard water Softener (or a salt-free conditioner, see below)
Soap doesn’t lather, film on skin and hair, stiff laundry Hard water Softener
Kettle or water heater scaling up Hard water Softener
Pool-like smell or taste Chlorine or chloramine Carbon filter: shower filter, pitcher, under-sink or whole-house
Dry skin or hair that smells of chlorine after showering Chlorine Shower filter (see our best shower filters)
Orange or brown stains, metallic taste Iron (common in wells) Iron filter; softeners only handle small amounts
Rotten-egg smell Hydrogen sulfide (wells) Specialist filter (oxidizing or catalytic carbon)
Concerns about lead, PFAS or nitrates Specific contaminants A filter certified for that contaminant. Usually reverse osmosis or carbon at the kitchen tap

When you need both

If your water is hard and also has a chlorine taste or a contaminant you want removed, you need both, and that’s common on city water in hard-water regions.

The usual setup is a whole-house sediment and carbon filter first, then the softener. Filtering first protects the softener’s resin from sediment and chlorine, which wears resin out over time. Then, if you want the best drinking water, a reverse osmosis system under the kitchen sink handles what the others don’t. It also strips out the extra sodium a softener adds.

Several brands, including Aquasana and SpringWell, sell filter-and-softener combos as one system. That’s simpler to buy and install, though a separate filter and softener lets you size each one to your water.

The other options, and where they fit

Reverse osmosis (RO)

Reverse osmosis pushes water through a very fine membrane and removes most dissolved substances, including lead, many PFAS, nitrates and fluoride. Most RO systems are installed under the kitchen sink for drinking and cooking water, because they’re slow and waste some water in the process. They’re the best choice for drinking water, but they don’t replace a softener for the rest of the house. Hard water also shortens an RO membrane’s life, so homes with very hard water often pair the two.

Salt-free “softeners” (water conditioners)

Most salt-free systems use a process called template-assisted crystallization (TAC). They don’t remove calcium and magnesium. Instead they change the minerals into tiny crystals that are less likely to stick as scale. Some independent studies have found TAC reduces scale in water heaters, but it won’t give you that slippery soft-water feel, better lather or spot-free glass, because the minerals are still there. A conditioner makes sense if your main worry is scale in pipes and appliances, you don’t want to handle salt, or local rules restrict salt-based softeners. See salt-free water softeners: do they work? for the evidence and the systems worth a look.

Electronic and magnetic descalers

These clip onto your pipe and claim to change how minerals behave using magnetic or electrical fields. The evidence is weak and mixed. They’re cheap, but we wouldn’t count on one for a real hard-water problem.

Shower filters

A shower filter is a small carbon or KDF filter for chlorine. It doesn’t soften water: in independent testing, no shower filter reduced hardness. If chlorine is your main complaint in the shower, a filter helps. If scale and dry skin from hard water are the issue, it won’t. See shower filters for hard water for what does help.

What each one costs to run

Option Upfront Ongoing
Shower filter about $40 to $170 about $30 to $240 a year in cartridges
Pitcher or faucet filter under $100 regular cartridge replacements
Under-sink filter or RO system typically a few hundred dollars, plus installation cartridges and membranes every 6 to 24 months
Whole-house filter from several hundred to a few thousand dollars installed cartridges or media replacement, depending on design
Salt-based softener about $500 to $6,000 installed (most pay about $1,500 to $3,000) salt, and occasional servicing
Salt-free conditioner varies by brand and size media replacement every few years

Shower filter costs are from our comparison of 17 filters. Softener costs from Fixr, Angi and HomeAdvisor. The other rows are broad ranges; check current prices for the models you’re considering.

Is a water softener worth it?

It’s worth it if your water is hard (roughly 7 gpg or more) and the effects bother you: scale on fixtures, appliances wearing out, spotty dishes, or soap that won’t rinse away. Hard water isn’t a health risk. It’s a cost and comfort problem, so the decision is mostly practical.

It’s probably not worth it if your water is soft to moderately hard, if you rent, or if your only complaint is the taste or smell of chlorine. That’s a filter problem.

Two things to think about before you buy:

  • Sodium. A salt-based softener adds some sodium to your water, more the harder your water is. For most people it’s a small amount, but if you’re on a low-sodium diet, use potassium chloride instead of salt, or add an RO system for drinking water.
  • Local rules. Some areas restrict salt-based softeners because of the salty discharge. Check before you buy.

How a softener works, how to size one and what maintenance involves are covered in how water softeners work.

Frequently asked questions

Does a water softener filter water? Not really. It removes hardness minerals and small amounts of iron, but not chlorine, lead, PFAS or most other contaminants. Add a filter for those.

Does a water filter soften water? No. Standard carbon and sediment filters, including shower and pitcher filters, don’t remove calcium and magnesium. Reverse osmosis does reduce hardness, but it’s used for drinking water only, not the whole house.

Can I drink softened water? Yes, for most people. It contains a little extra sodium. If you’re watching your sodium intake, use a potassium-based softener salt or drink RO-filtered water from the kitchen tap.

Should the filter go before or after the softener? Usually before. A sediment or carbon filter in front of the softener protects the resin from grit and chlorine. Reverse osmosis for drinking water goes after, at the kitchen sink.

Is a whole-house filter worth it on city water? It depends on what’s in your water report. If the only issue is chlorine taste, a kitchen filter and a shower filter are much cheaper. A whole-house filter makes more sense if you want chlorine or chloramine removed from every tap, or your report shows something you want to remove throughout the house.

Is hard water bad for you? No. The calcium and magnesium in hard water aren’t a health risk. Hard water’s downsides are scale, cleaning, appliance wear and how soap feels on skin and hair.

Sources